Crane specialists on call — project-specific quotes delivered within 24 hours. Request Crane Quote →

Demag Crane Blog — Lifting Industry Insights & Engineering Analysis

Technical guides, crane selection advice and industry perspectives from Demag's engineering team.

Crane Insights

The Demag Parts Mistake I Made 15 Times (So You Don't Have To)

After 15 Demag spare parts mistakes that cost roughly $46,000, a 12-year service veteran explains what really causes Demag crane, backhoe, and cross-brand part failures—and the five-point checklist that caught 47 potential errors. [...]
Continue Reading →
Crane Insights

Demag 5 Ton Overhead Crane: The Inspection That Caught a Certificate Error

A quality manager tells the story of reviewing a Demag 5 ton overhead crane, matching legacy Demag Terex cranes documentation, and knowing which checks require an OEM specialist. [...]
Continue Reading →
Crane Insights

Demag Used Cranes: The CC 8800 Crawler Crane Spec Mistake That Changed My Procurement Checklist

A crane procurement manager with 9 years of experience explains how a Demag CC 8800 crawler crane listing taught him that model names are not specifications. Includes the cost of vague language, a condensate pump mistake, and the checklist he now uses before buying Demag used cranes. [...]
Continue Reading →
Crane Insights

I Saved $6,100 on Demag Wear Parts. The Final Bill Was $46,800.

Compare Demag wear parts suppliers on unit price and you risk paying far more later. This is the $46,800 Demag shovel spare parts mistake that led to a TCO checklist every buyer should use. [...]
Continue Reading →
Crane Insights

Demag and Tadano Demag Crane Parts: Start With the Data Plate, Not the Search Box

I coordinate urgent Demag and Tadano Demag crane parts. My blunt opinion: a demag shovel spare parts search is not enough. You need the serial number and the exact machine spec first. [...]
Continue Reading →
Crane Insights

Which of the Following Is the Most Dangerous Factor Among Crane Accidents? A Demag Parts Buyer's Perspective

An office buyer explains why the most dangerous factor among crane accidents is often an unverified replacement part, with lessons from ordering Demag crawler parts, Demag shovel spare parts, bob crane and concrete mixer components. [...]
Continue Reading →
Crane Insights

Demag Jib Crane Buying Guide: Three Scenarios (and the Questions Most People Skip)

A practical, scenario-based guide to choosing a Demag jib crane, sourcing Tadano Demag spare parts online, and dealing with the word 'crane' when it doesn't mean a lifting machine. [...]
Continue Reading →
Crane Insights

Demag Spare Parts: What a Cost Controller Actually Buys for Tadano Demag Cranes

Demag spare parts don't have one correct supplier. Here's how a procurement manager decides between genuine, remanufactured, and aftermarket parts for overhead cranes, gantry cranes, and mobile cranes—including the AC compressor question. [...]
Continue Reading →
Crane Insights

Demag Excavator Spare Parts: A Cost Controller's FAQ After Six Years of Buying Them

A procurement manager answers common Demag excavator spare parts questions—and explains why the same total-cost logic applies to a Willow pump, a drill press, and how to use a tongue scraper. [...]
Continue Reading →
Crane Insights

Demag Cranes, Parts & Hoists: Why the Cheapest Quote Is Usually the Most Expensive

Three scenarios for buying Demag parts, hoists, and gantry cranes—and why total cost of ownership beats sticker price. Real mistakes from a procurement veteran. [...]
Continue Reading →